Equipment and Capabilities

Excello 605 CNC Machining Center

  • Work envelope: X 30", Y 13.5", Z 5.5", max, typical (manually adjustable knee extends Z to 16")
  • Table Workspace: 47.25" x 11" table, 750lbs max load
  • Work Envelope, 3 axis: 30" (x) x 15" (y) x 6" (z quill) + 12" (z knee)
  • Work Envelope, 3+2 axis: 5" x 5" x 5" (A/B axis 0 to 110 degrees, C axis 360 degrees)
  • Spindle: 3.5HP
  • Machining Capacity: 3 cubic in/min, 1" drilling, 4" boring, 3/4-10 UNC tapping
  • Resolution: 0.0001" (0.00254mm), Repeatability: 0.0005" (0.0127mm) (all axes)
  • Rapids: 180 ipm (4.5mpm)
  • Rigid tapping

Hardinge T-42 Conquest CNC Lathe

  • Dual Spindles, 12-station turret forward, 12-station backward
  • Hole through both spindles: 1 7/8"
  • 16C Collect Capacity: 1 5/8"
  • Power Chuck Capacity: 6" max, 1 5/8" through chuck
  • Speed range: 50 - 4400 main, 50 - 6000rpm secondary>
  • AC Spindle Drive (30-minute rating) 15hp (10kw)
  • AC Spindle Drive (30-minute rating) 7.5hp (7.4kw)
  • Max swing over bed: 12"
  • Max Threading Diameter: 8"
  • Max Turning Diameter: 8"
  • Max Fixture Diameter: 9"
  • Max Weight on Spindle (including chuck): 75lbs
  • Max Travel: X = 12.5", Z = 12"
  • Max Traverse Rate: X = 400 ipm (5 mpm), Z = 400 ipm (10 mpm)
  • Work Envelope: 12" x 14", Z 10", max, typical
  • Resolution: 0.0001" (0.001mm), Repeatability:

Turning: 13 x 40" Manual Lathe

  • Work Envelope: X 40", Z 13", max, typical
  • 6" ~ 8" self-centering and independent jaw chucks
  • Resolution: +/- 0.0005" (0.0254mm), Repeatability: +/-0.0005" (0.0254mm) typical
  • 5 HP spindle

Manual Drill Press

  • 48" height, max, typical

Table Saw

  • 12" blade diameter - 3.5" height cut, max, typical
  • 4'x8' panel, max, typical
  • Wood and plastic only

6x12 Grinder

  • 6 x 6 x 12" envelope typical
  • 0.0001" downfeed
  • Manual in-feed and cross-feed

Mitre Saw

  • 6" H x 10" D cut, max, typical

Horizontal Bandsaw

  • 4" H x 6" D cut, max, typical

Vertical Bandsaw

  • 8" H x 12" W x 12" D cut, max, typical

TIG/MIG Welder

  • 120A typical, 180A max
  • Steel, Aluminum, Copper
  • Under 1/2" typical, 5/8" max, greater with multiple passes
  • Note: We will not weld structures involving human support or safety

For capabilities required but not shown here, please inquire within.